Festool CMS-PS 200 Notice D'utilisation D'origine page 11

 Vacuum off dust deposits
 A worn or damaged bench insert is to be re-
placed
 On completion of your work, wind the power
cable around the holders (7.4).
Customer service and repair. Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at:: www.festool.com/Service
Use only original Festool spare parts!
EKAT
4
Order No. at: www.festool.com/Service
5
3
2
1
7 Accessories, tools
For your own safety, use only original Festool ac-
cessories and spare parts. The accessory and tool
order number can be found in the Festool cata-
logue or on the Internet under "www.festool.com".
8 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible recy-
cling centre! Observe the valid national regulations.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
9 EU Declaration of Conformity
Aufnahmeeinheit für Stichsägen
Retaining Panel for jigsaws
Plaque de fi xation pour la scie
sauteuse
CMS-PS
We declare under sole responsibility that this
product comply with all relevant requirements
of the following directives, norms or normative
documents:
2006/42/EG, 2004/108/EG (until 19.04.2016),
2014/30/EU (from 20.04.2016), 2011/65/EU,
EN 60745-1:2009, EN 60745-2-11:2010, EN
55014-1:2006+A1:2009+A2:2011, EN 55014-2:
1997+Corrigendum 1997+A1:2001+A2:2008, EN
61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-
3:2013.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
2015-03-10
Serien-Nr.
Serial No.
N° de série
493938
11