Transport; Storage; Recycling Or Disposal Of Your Machine - Garland BOLT 325 QG Manuel D'instructions

Masquer les pouces Voir aussi pour BOLT 325 QG:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48

10. TRANSPORT

Never pick up or carry machine while the engine is
running. Also stop the engine whenever it moves
between different areas of work.
Wait 5 minutes once the machine is turned off so it
can cool before storing the machine or transporting it.
The exhaust tube of the machine with continue to be
hot after turning off the motor.
If you are transporting the machine in a vehicle secure
it firmly to prevent slipping or tip over.
Keep in mind the weight of the machine in the event
that you need to raise it. See the weight in the
technical characteristics of the machine. Use the
handle to lift it.
Always transport the machine in horizontal position.

11. STORAGE

Wait 5 minutes once the machine is turned off for it to
cool down before storing the machine or transporting
it. The exhaust pipe will remain hot after turning off
the engine. Do not store the machine in areas near
flammable materials (dried grass, wood...), gas or
fuels.
Store this machine in a place not accessible to
children and safe so that it does not endanger any
person and that is dry, clean and at a temperature
between 0 ° C and 45 ° C.
Before storing the machine follow the steps for the
maintenance chapter.
The machine should be stored on a clean flat surface
when not in use.
If you plan to store the machine in a closed place
empty the fuel vapors as they could come into contact
with a flame or heat source and ignite. If the fuel
tank has to be emptied must be done outdoors and
according to the regulations of recycling.
12. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Protect the environment. Recycle oil used by this
machine, taking it to a recycling center. Do not pour
used oil in drains, land, rivers, lakes, or seas.
Dispose of your appliance organically.
Do not get rid of machines together with
the domestic waste. Plastic and metal
components can be classified according
to their nature and be recycled.
The materials used to pack this machine
are recyclable. Please do not dispose of
packaging with the household garbage.
Throw away this packaging at an official
collection point.
45/120
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bolt 525 qgBolt 325 qg-v17Bolt 525 qg-v17

Table des Matières