Fuel Safety; Important; Work Area Safety - Garland BOLT 325 QG Manuel D'instructions

Masquer les pouces Voir aussi pour BOLT 325 QG:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
English
Do not use this machine if any component is
damaged.
Never use the machine with defective guards, or
without safety devices.
Do not modify the machine controls or the regulation
of the engine speed.
If the machine vibrates abnormally stop the engine,
inspect the machine looking for the possible cause
and repair. If you cannot find the reason take the
machine to a service technician.
Do not touch the exhaust of the machine with the
engine running or shortly after stopping it. The exhaust
of the machine reaches high temperatures while the
motor is running and maintains it for some time after
stopping.
2.2.1. CLOTHING AND SAFTEY EQUIPMENT
Never use this machine barefooted or with sandals.
Use this machine with sturdy shoes.

2.3. WORK AREA SAFETY

Do not use the machine in explosive
atmospheres, as well as in the presence
of flammable liquids, gases and dust. To
prevent the risk of fire and be sure to have good
ventilation, use this machine in a clean area that has
nothing within a distance of at least 1 meter.
Electrical machines create sparks which may ignite
dust or fumes.
Do not start the machine in a room or
enclosure. The exhaust gases and fuel
vapors contain carbon monoxide and
harmful chemicals. In the case of a concentration of
gases produced by insufficient ventilation, remove
from the workspace everything that prevents the flow
of clean air to improve ventilation and de not return to
work in the area unless you have properly ventilated
it and are sure that ventilation is sufficient so this
concentration of gases does not happen again.
Keep away children and onlookers while operating this
machine. Distractions can cause loss of control.
Make sure that children, people or animals do not
come into your work area.
Place the appliance on a clear area, where there is
strong support and is not too close to a wall.

2.4. FUEL SAFETY

IMPORTANT: The fuel and oil are highly
flammable. If fuel, oil or the machine ignite,
put out the fire with a fire extinguisher.
The fuel and oil are dangerous, avoid
contact of the fuel and oil with the skin and
eyes. Do not inhale or swallow. In case of
ingestion of fuel or oil see a doctor immediately. If you
come into contact with the gas or oil rinse with soap
and water as soon as possible, if your eyes or skin are
irritated immediately consult a doctor.
The gas and oil are extremely flammable
and explosive under certain circumstances.
Do not smoke or come into close contact
with flames, sparks or other sources of heat with the
machine. Do not smoke while transporting fuel, when
you fill out the tank or when the machine is working.
Do not refuel in closed or poorly ventilated
areas. Fuel and oil fumes contain dangerous
chemical substances. In the case of a
concentration of gases produced by insufficient
28/120

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bolt 525 qgBolt 325 qg-v17Bolt 525 qg-v17

Table des Matières