VINCENT SV-237MK Manuel D'utilisation page 36

CONNECTION OF SOURCE DEVICES OVER
The integrated D/A converter makes it possible to receive also digital audio signals via an optical and/or
coaxial cable and to transmit them analogously to the amplifier. Here, the "Optical IN" and "Coaxial
IN" (15) connections serve as input.
Digital audio source with optical signal connection
SV-237MK
Digital audio source with coaxial signal connection
This device is equipped with a switch (19) that can be used to change the country-specific voltage from
230 V to 110 V.
Please never actuate the switch during operation! The voltage must only be switched by a techni-
cian, since the device fuse must also be replaced after actuation of the switch! Information about
the device fuse can be found on the back of the device.
Unauthorised actuation of the switch will void any warranty claim!
36
Vincent
OPTIC L IN
SV-237MK
SWITCHING THE VOLT GE
ND CO XI L IN
Optical digital cable
DIGITAL OUT
Coaxial Digital cable (RC )
DVD, SACD, CD,
TV/Radioreceiver
DVD, SACD, CD,
TV/Radioreceiver
DIGITAL OUT