VINCENT SV-237MK Manuel D'utilisation page 29

1
6
1. TREBLE
This is the knob for setting the treble proportions
(high frequencies) of the sound.
2. BASS
This is the knob for setting the bass proportions
(low frequencies) of the sound.
3. Display window for the tube
4. INPUT: Input Selector
This dial allows you to choose one of the six
inputs.
5. VOLUME: Volume dial
This is the knob for the adjustment of the main
volume level of the system.
6. TONE: tone control
If deactivated, audio signals bypass the tone con-
trol that has been set with the dials BASS (2) and
TREBLE (1).
7. Input selection LEDs
The LED that is actually lit shows you what input
channel has been selected. Additionally these
LEDs show that the appliance is switched on and
not muted.
FRONT VIEW
2 3
7 9
4
8. Infrared remote control receiver
9. POWER
This is the main power switch for turning on and
off the device. The preamplifier is separated from
the mains voltage when switched off and cannot
be set into a standby state.
10. LOUD: Loudness function
This button activates and deactivates an audio
signal correction that adapts the loudspeaker
audio signal to the human auditory sensation in
11. PHONES
If desired, you can connect a set of headphones
with an impedance between 32
this stereo jack. As long as the headphones are
plugged in, the loudspeakers are switched off.
The volume of the headphone can be changed
with the rotary knob "VOLUME" (5)(23). Before
plugging-in a headphone, the volume setting
should be reduced.
5
10
8
and 600 to
29
Vincent