Scheppach DH1300PLUS Traduction Des Instructions D'origine page 11

Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only be
operated by persons who were instructed concerning the
operation of the machine and who are informed about
the associated dangers. The minimum age requirement
must be complied with. In addition to the safety require-
ments in these operating instructions and your country's
applicable regulations, you should observe the generally
recognized technical rules concerning the operation of
woodworking machines.
Device Description (Fig.1)
1. Dust guard
2. Locking sleeve
3. Selector switch for hammer drilling/chiseling
4. ON/OFF switch
5. Handle
6. Status indicator
7. Power cable
8. Additional handle
9. Depth stop
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58  www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
Proper use
The tool is designed for drilling with hammer action in
concrete, rock and brick, as well as for chiseling work,
always using the respective correct drill or chisel bit.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of mi-
suse. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused
as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equi-
valent purposes.
Safety information
General safety instructions for electric tools
m CAUTION: Read all safety regulations and ins-
tructions. Any failures made in following the safety
regulations and instructions may result in an electric
shock, fire and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
The term "electric tool" used in the safety instructions
refers to electric tools operated from the mains power
supply (with a power cable) and to battery operated
electric tools (without a power cable).
Workplace safety
• Keep your work area clean and well illuminated.
Untidy or unlit work areas can result in accidents.
• Do not operate the electric tool in an environ-
ment where there is a risk of explosions and
where there are inflammable liquids, gases or
dust. Electric tools produce sparks which could set
the dust or vapours alight.
• Keep the electric tool out of the reach of child-
ren and other persons. If there is a distraction, you
may lose control of the appliance.
Electrical safety
• The connector plug from this electric tool must
fit into the socket. The plug should never be alte-
red in any way. Never use adapter plugs together
with earthed electric tools. Unaltered plugs and
correct sockets reduce the risk of an electric shock.
• Avoid bodily contact with earthed surfaces such
as pipes, heating, ovens and fridges. The risk of
electric shock is increased if your body is earthed.
• Keep the tool out of the rain and away from
moisture. The ingress of water into an electric tool
increases the risk of an electric shock.
11 І 28