Ducting Options; Ducting Version; Preparation - Elica Professional Série Guide D'utilisation, D'entretien Et D'installation

Ducting options

Closely follow the instructions set out in this manual.
All responsability, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this
manual, is declined.
The hood is equipped with an 8" (20.3 cm) round transition for discharge of fumes to the outside.

Preparation

Do not cut a joist or stud unless absolutely necessary. If a joist
or stud must be cut, then a supporting frame must be
constructed.
Fittings material is provided to secure the hood to most types
of walls/ceilings.
However, a qualified technician must verify suitability of the
materials in accordance with the type of wall/ceiling.
Before making cutouts, make sure there is proper clearance
within the ceiling or wall for exhaust vent.
Recommended installation height:
Hood installation height above cooktop is the users preference.
The lower the hood is above the cooktop, the more efficient
the capturing of cooking odors, grease and smoke.
6

Ducting version

Roof Venting
A
B
A. Roof cap
B. 8" (20.3 cm) round vent
Wall Venting
C
A
B
A. Wall cap
B. 8" (20.3 cm) round vent
C. 90º elbow
I CAUTION
For gas cooktop & range installations: Mount the hood so the
bottom is at least 36" (91.4 cm) above the cooking surface.
For electric/induction cooktop & range installations: Mount the
hood so the bottom is at least 30" (76.2 cm) above the cooking
surface.
There is no maximum mounting height, however, we recom-
mend mounting the hood no greater than 36" (91.4 cm) above
the cooking surface. For every inch (2.54 cm) above 36" (91.4
cm), fume and moisture capture efficiency diminishes at an in-
creasing rate and may not deliver an acceptable level of venti-
lating performance.
This hood is intended for household use.
PLEASE READ THE INSTALLATION MANUAL FOR SPECIFIC
APPLICATION. Check your ceiling height and hood height
before selecting your hood.