Maintenance - Tineco ifloor BREEZE Mode D'emploi

Maintenance

Note:
• For optimal performance and to prevent odors, always clean and dry DWT, floater, filters, brush
roller, brush roller cover completely after each use.
• Please make sure each part is installed correctly or the appliance may not work properly.
• After maintenance, place the appliance on the storage tray vertically. Do not expose the appliance
to direct sunlight, and store it indoors in a dry place.
Main Body
To reduce the risk of injury, switch off before
performing maintenance.
Dirty Water Tank
• When dirty water reaches the Max line, the floater will block off the DWT and create a high pitched
sound indicating it's time to switch off the appliance.
• Pull up the tank lid to empty the DWT. Rinse the inside of the DWT and place back into the
appliance.
Use a cloth to clean the surface with a neutral
detergent. The cloth should be dry to prevent
water from entering the appliance.
11