Brush Roller - Tineco ifloor BREEZE Mode D'emploi

Brush Roller Cover
Grab the front handle while pressing the button
and pull upward to remove.
②
When replacing, always latch the brush cover into
place to avoid leakage.

Brush Roller

Remove the brush roller by grabbing the brush
roller tab and pulling upward.
Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
①
Remove the hair and debris wrapped around the
roller and rinse with water (brush roller tab can be
removed). Replace the brush roller back onto the
storage tray, and allow it to dry completely before
reinstalling.
Replace the brush roller by inserting the brush
roller end into the right side of the holder, then
lock the pull tab into place by pressing downward.
13
Rinse with water.