Maintenance - Tineco PURE ONE S11 Série Mode D'emploi

Maintenance

Note:
• Clean the dustbin and filters after each use.
• Use the cleaning tool to thoroughly clean the pre-filter when the indicator light shows a
blocked air channel. To maintain high performance, wash and dry the pre-filter monthly,
replacing it every 6 months.
Wash and dry the HEPA filter every 3 months, replacing it every 12 months.
Dustbin and Mesh Filter
1
Press the dustbin release button to remove
the dustbin.
3
Mesh filter
Turn counter-clockwise to remove the
filters.
5
③
④
②
①
After cleaning, insert the clean pre-filter
into the mesh filter properly and it clicks
into place. Install the clean filter and
dustbin back into the main body, then
close the dustbin flap.
2
Clean with a damp cloth, taking care to
prevent water entering the appliance main
body and battery.
4
Pre-filter
Clean the dustbin and mesh filter with a damp
cloth. Air dry completely before reinstalling.
• Do not wash the dustbin as it contains a dust
sensor. If it comes into contact with water,
please dry it with a hair dryer.
18
Warning: