Tecno-gaz ONYX B 5.0 Mode D'emploi page 56

ENGLISH
POWER SUPPLY CORD
Take the power supply cord provided (pos.
the socket of the back panel of the autoclave then insert the male plug (pos.
electric plug of the system.
Picture
Envelope standard
Code
MEMORY CARD
To be used to memorize the autoclave cycles (for the best compatibility with the device, it is
advisable to always use the original memory card).
WARNING: The card contains the software reading log cycle - Carry out the rescue
and installed on the PC before the commissioning of the autoclave (see par.12)
Picture
Envelope standard
Code
IMPORTANT
Ask for and use only and exclusively original accessories.
12
B ) and insert the female plug (Fig.A-pos.
Fig.11
1
CECG006
Fig.12
1
CEGS001
5 ) in
A ) in the