Pioneer CDJ-350 Mode D'emploi page 11

2 Press [u].
Turn on the power of this unit.
3 Press [ ] for at least 1 second.
The [CONTROL MODE] screen appears on the main unit display.
! The message [Installing device driver software] may appear
when the CDJ-350 is connected to the computer for the first time or
when it is reconnected to the computer's USB port. Wait until the
[Your devices are ready for use] message appears.
! When installing on Windows XP
— [Can Windows connect to Windows Update to search for
software?] may appear while the installation is in progress.
Select [No, not this time] and click [Next] to continue with
the installation.
— [What do you want the wizard to do?] may appear while the
installation is in progress. Select [Install the software auto-
matically (Recommended)] and click [Next] to continue with
the installation.
— If [Hardware Installation] appears on the screen while the
installation is in progress, click [Continue Anyway] and con-
tinue with the installation.
Adjusting the buffer size
This unit functions as an audio device conforming to the ASIO
standards.
! If an application using this unit as the default audio device (DJ
software, etc.) is running, quit that application before adjusting the
buffer size.
Click Windows [Start] menu > [All Programs] > [Pioneer] >
[Pioneer CDJ] > [Pioneer CDJ ASIO Settings Utility].
A sufficiently large buffer size decreases the chance of sound dropout
(sound interruption) but increases audio signal transmission delay
(latency).
Checking the version of the driver
software
Click Windows [Start] menu > [All Programs] > [Pioneer] >
[Pioneer CDJ] > [Pioneer CDJ Version Display Utility].
! You can check the firmware version of this unit on the screen.
! The firmware version is not displayed when the CDJ-350 is not con-
nected to the computer or when the CDJ-350 and computer are not
properly communicating.
Checking the latest information on the
driver software
For the latest information on the driver software for exclusive use with
this unit, visit our website shown below.
http://www.prodjnet.com/support/
11
En