Front Panel Features - Numark X5 Guide D'utilisation Rapide

FRONT PANEL FEATURES

MICROPHONE / AUXILIARY INPUT CONTROLS
1. MIC / AUX GAIN (Microphone / Auxiliary Gain): This knob adjusts the volume of both the main
microphone and auxiliary inputs. The gain should be turned completely to MIN when connecting and
disconnecting equipment.
(Note: This signal will not be heard in the Cue channel.)
2. TREBLE (Microphone / Auxiliary High EQ): Adjusts the high (treble) frequencies of the microphone /
auxiliary channel.
3. BASS (Microphone / Auxiliary Low EQ): Adjusts the low (bass) frequencies of the microphone /
auxiliary channel.
4. MIC / AUX ON / OFF: Mutes and unmutes the microphone / auxiliary channel.
5. MICROPHONE: Connect a 1/4" microphone to this input. Microphone controls are located on the top
panel.
PRIMARY MIXING CHANNEL CONTROLS
6. GAIN KNOB (Input Level Trim): This rotary control adjusts the pre-fader input signal levels of the
inputs. This level adjustment should be used with the pre-fader meter to match levels of both input
channels.
6
1
7
2
7
3
4
7
11
8
10
9
5 20
If both inputs are used simultaneously the inputs will be mixed together.
6
7
17
7
14
7
16
21
8
13
9
12
19
4
22
23
15
11
10
18