Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 114.360 Mode D'emploi

NOTE!
Foodstuffs will remain warm for longer if their containers are covered.
•
Before placing foodstuffs on the warming tray, check that it is on a stable surface in
order to avoid the container with foodstuffs from sliding off.
CAUTION!
Do not move the warming tray when containers with foodstuffs are on it; remove
them first! When removing a container from the warming tray, wear gloves!
•
If the unit will remain unused for a longer time, remove the plug from the socket.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device after each use.
o Clean the warming tray with a soft, moist cloth and wipe dry.
o Never use abrasive substances, nor bleaches or substances containing alcohol.
o Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o Before storing the device in a dry place you should make sure it has been cleaned
properly.
- 22 -