Instructions For Safe Operation - SilverCrest SKG 1700 A1 Mode D'emploi

__RP90859_B2.book Seite 46 Montag, 26. August 2013 1:31 13

Instructions for safe operation

• This device can be used by children from the age of 8 and peo-
ple with restricted physical, sensory or intellectual abilities or
people without adequate experience and/or understanding, if
they are supervised or instructed on how to use this device safely
and if they are aware of the resulting risks.
• Children must not play with the device.
• Cleaning and user maintenance must not be performed by unsu-
pervised children unless they are older than 8 years and super-
vised.
• Children under the age of 8 must be kept away from the device
and the power cable.
• This device is not intended to be operated using an external timer
clock or a separate remote control system.
• If the power cable of this device should become damaged, it
must be replaced by the manufacturer, the manufacturer's custom-
er service department or a similarly qualified specialist, in order
to avoid any hazards.
• Charcoal and similar fuels must not be used in this device.
• The heating spirals must not be wiped with a damp cloth.
DANGER for children
• Packing materials are not children's
toys. Children should not be allowed to
play with the plastic bags: There is a
risk of suffocation.
• Please ensure that children are not able
to pull the device down from the work
surface with the power cable.
• Keep the device out of the reach of chil-
dren.
DANGER! Risk of electric
shock due to moisture
• The device, the power cable and the
mains plug must not be immersed in wa-
ter or any other liquids.
• Protect the device from moisture, water
drops and water spray.
46 GB
• If liquid gets into the device, remove the
mains plug immediately. Have the device
checked before reusing.
• Never touch the device with wet hands.
• If the device falls into water, disconnect
the mains plug immediately. Only then
is it safe to retrieve the device.
DANGER! Risk of electric
shock
• Only plug the mains plug into the wall
socket after the device has been com-
pletely assembled.
• Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-