Sony BRAVIA KDL-S40A11E Mode D'emploi page 32

32
GB
Option Description
Presets programme channels manually.
Programme
1
2
System
3
4
Channel
5
6
7
8
9
Repeat the procedure above to preset other channels manually.
Assigns a name of your choice, up to five letters or numbers, to the
Label
selected channel. This name will be displayed briefly on the screen
when the channel is selected.
1
2
Fine-tunes the selected programme number manually if you feel
AFT
that a slight tuning adjustment will improve the picture quality.
(Normally, fine tuning is performed automatically.)
1
2
To restore automatic fine tuning, select "On" in step 1.
Press M/m to select "Programme", then press OK.
Press M/m to select the programme number you want
to manually tune (if tuning a VCR, select channel 0),
then press <.
Press M/m to select "System", then press OK.
Note
Depending on the country/region selected for "Country"
(page 26), this option may not be available.
Press M/m to select one of the following TV broadcast
systems, then press <.
B/G: for western European countries/regions
D/K: for eastern European countries/regions
I: for the United Kingdom
L: for France
Press M/m to select "Channel", then press OK.
Press M/m to select "S" (for cable channels) or "C" (for
terrestrial channels), then press ,.
Tune the channels as follows:
If you do not know the channel number (frequency)
Press M/m to search for the next available channel. When a
channel has been found, the search will stop. To continue
searching, press M/m.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
Press OK.
Press OK to select "Confirm", then press OK.
Follow steps 3 to 5 of "Programme Labels" (page 30).
Press OK to select "Confirm", then press OK.
Press M/m to adjust the fine tuning over a range of -15
to +15, then press OK.
Press OK twice.