Features Menu; Power Saving; Light Sensor; Av2 Output - Sony BRAVIA KDL-S40A11E Mode D'emploi

Features menu

Features

Power Saving

Standard

Light Sensor

On

AV2 Output

TV

TV Speakers

On

PC Adjustment

Select: Set: Back:
OK
Power Saving
Light Sensor
AV2 Output
26
GB
End:
MENU
1
Press OK to select "Power Saving".
2
Press m/M to select one of the following, then press OK.
• Standard: Default settings.
• Reduce: Reduces the power consumption of the TV.
• Picture Off: Switches off the picture. You can listen to the sound with the picture off.
Automatically optimizes the picture settings according to the ambient light in the room.
1
Press OK to select "Light Sensor".
2
Press m/M to select "On" then press OK.
Sets a signal to be output through the socket labelled
you connect a VCR to the
connected to other sockets of the TV.
1
Press OK to select "AV2 Output".
2
Press m/M to select one of the following, then press OK.
• D-TV: Outputs a digital broadcast.
• A-TV: Outputs an analogue broadcast.
• AV1: Outputs signals from equipment connected to the
• AV4: Outputs signals from equipment connected to the
• Auto: Outputs whatever is being viewed on the screen.
You can select the options listed below on the
Features menu. To select options, see "Navigating
through menus" (page 19).
/ 2 socket, you can then record from the equipment
/ 2 on the rear of the TV. If
/ 1 socket.
4/ 4 socket.