Insignia NS-DVDVCR Guide De L'utilisateur page 20

The No disc or tape is
DVD/VCR inserted
does not
start
An unplayable disc
playback
is inserted
The disc is placed
upside down
The disc is not
placed within the
guide
The disc is dirty
The Rating level is
set
Video tape The cassette
cannot be compartment may
inserted not be empty
The remote There is an obstacle
control does in the path of the
not work remote control and
correctly your DVD/VCR
The batteries in the
remote control are
exhausted
The remote control
is not pointed at the
remote sensor of the
DVD/VCR
The remote control
is too far from the
DVD/VCR
This remote control
uses the same
buttons for VCR and
DVD functions, such
as PLAY
The The camcorder is off Turn camcorder on and operate
camcorder
image is not
shown
The The DVD/VCR's
camcorder source is set
image is not incorrectly
shown on TV
screen
Timer The DVD/VCR clock
recording is is not set to the
not possible correct time
The timer has been
programmed
incorrectly
The TIMER Record
indicator light does
not appear after
programming the
timer
Cannot The remaining blank
record or did space on the tape is
not record insufficient
successfully
The source you are
trying to record is
copy-protected
20
Insert a disc or tape (make sure
that the disc or tape indicator in
the display window is lit)
Insert a playable disc. (Check
the disc type and Regional
code.)
Place the disc with the
playback side down
Place the disc on the disc tray
correctly inside the guide
Clean the disc
Cancel the Rating function or
change the rating level
Eject the tape
Remove the obstacle
Replace the batteries with new
ones
Point the remote control at the
remote sensor of the DVD/VCR
Operate the remote control
within 23ft (7m)
When using a VCR, first press
the VCR button. When using a
DVD, first press the DVD
button
it correctly
Use INPUT to select the correct
input channel (LINE1 or LINE2)
Set the clock to the correct
time
Reprogram the timer
Reprogram the timer and turn
off the DVD/VCR to enable the
timer
Use another tape
You cannot record the source
www.insignia-products.com
Stereo Audio TV is not
Record or Stereo-compatible
Playback is
Broadcast program
not present
is not in stereo
format
DVD/VCR LINE Out
jacks are not
connected to TV
A/V In jacks
DVD/VCR
Audio/Video Out is
not selected for
viewing at the TV
Maintaining
Handling and cleaning the DVD/VCR
Shipping the DVD/VCR
Please save the original shipping carton and
packing materials. If you need to ship the
DVD/VCR, for maximum protection, re-pack the
it as it was originally packed at the factory.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the DVD/VCR.
•
Do not leave rubber or plastic products in contact
with the DVD/VCR for a long period of time
because they can leave marks on the surface.
Cleaning the case
• To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution.
• Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage
the surface of the player.
Maintaining the DVD/VCR
This DVD/VCR is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality could be
diminished.
Depending on the operating environment,
regular inspection and maintenance are
recommended after every 1,000 hours of use.
For details, please contact your nearest
authorized service center.
Care and handling of discs
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
No solution
No solution
Make A/V connections. Stereo
is available only on A/V output
from DVD/VCR.
Select AUX or A/V source as TV
input