Installation Instructions; Grille Installation - Danby DTAC100F1WDB Manuel Du Propriétaire

INSTALLATION INSTRUCTIONS

AIR CONDITIONER ACCESSORIES
1. 1" x 1 1/2" x 84" Stuffer seal
2. 17" long Tapered spacer blocks (x2)
3. 4 1/2" x 3 1/2" x 1 1/2" Centering support
blocks (x4)
4. 1/8" x 4 1/2" x 14 1/2" Plastic divider (x2)
5. 1" x 1 1/2" x 25" Seal (x3)
6. 1" x 1 1/2" x 14" Seal (x2)
7. 1" x 3/8" x 25" Seal (x3)
8. 1" x 3/8" x 14" Seal (x2)
9. 1" x 3/4" x 14" Seal (x2)
10. Side trim frame (x2)
11. Top and bottom trim frame (x2)
12. Green ground wire
13. Toothed washer for grounding screw (x2)
14. Grounding screw
15. Plastic grille
16. Aluminum grille
17. Plastic nuts (x4)
18. Screw washer (x4)
19. Screw (x4)
1 2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
3

GRILLE INSTALLATION

The installation of a this air conditioner requires the
installation of a compatible air conditioner sleeve,
which should be purchased separately.
A grille must be installed on the appliance before it
is placed inside the air conditioner sleeve. This grille
can be aluminum or plastic depending on what will
work best with the sleeve.
Aluminum Grille Installation
Place the aluminum grille on the rear of the
appliance and secure with screws.
Ensure that the aluminum grille is installed in the
right direction, with the fi ns pointed outward.
Plastic Grille Installation
A plastic grille can also be installed but it is
recommended to use the aluminum grille if possible
for better air fl ow.