Installation Instructions - Danby DAC050MB1WDB Manuel Du Propriétaire

INSTALLATION INSTRUCTIONS

ELECTRIC SHOCK HAZARD
To avoid the possibility of personal injury,
disconnect power to the appliance before installing
or servicing.
REQUIRED TOOLS
• Screwdrivers: Phillips and fl at head.
• Power Drill: 3.2mm (1/8 inch) diameter drill bit
• Pencil
• Measuring Tape
• Scissors
• Carpenter's Level
Note: Save the shipping carton and packing
materials for future storage or transportation.
Remove the plastic bag from the carton containing
the installation hardware kit necessary for the
installation of your air conditioner. Please check
the contents of the hardware kit against the
corresponding model check list, prior to installation
of the appliance.
INCLUDED ACCESSORIES
1. 13 mm (1/2 inch) screws (x7)
2. 9.5 mm (3/8 inch) screws (x4)
3. Adhesive foam seal
4. Regular foam seal
5. Safety lock
6. "L" shaped mounting bracket
7. Sash bracket for wood windows (x2)
8. Sash bracket for vinyl windows (x2)
9. Side curtains
1
2
3
4
5
6
7
8
9
ASSEMBLY
Note: Images in this manual are for instructional
purposes only. The actual shape of the appliance
may vary slightly.
Install the "L" Shaped Bracket
Attach the "L" shaped bracket to the top of the
cabinet as shown below using the provided 9.5 mm
(3/8 inch) screws (x4).
Note: The "L" shaped bracket may come factory
installed on some models.
Install the Side Curtains
Attach the side curtains to the cabinet by sliding the
curtain frame into the side channel of the cabinet as
shown below.
The curtains are labeled "left" and "right on the
frames. This refers to the left and right sides of the
appliance when facing the front of the appliance.
8