Adjust The Penetration Depth; Adjust Staple Clinch - Josef Kihlberg R557PN Mode D'emploi

Josef Kihlberg R557PN

6.2 ADJUST THE PENETRATION DEPTH

The depth of the stapling is easily adjused using the
setting knob.
– Depress the knob (Fig. 6/1) and turn it to any of the
five positions.
– Low stapling penetration
= Deep stapling penetration

6.3 ADJUST STAPLE CLINCH

Be sure that the tool is not pointing at
yourself or anyone else when connec-
ting it to the compressed air line.
It is possible to adjust how tightly the staples are
closing.
– With a small screwdriver turn the adjusting nut
behind the slot (Fig. 7/1). Turn clockwise to close
the clinch (7/A). Turn the adjusting nut anticlockwise
to open up the clinch (7/B).
8
Fig. 6
1
A
B
Fig. 7
1
05.20