Measurement Display - Bosch+Sohn Boso medicus family Mode D'emploi

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
EN
illustration 7).
1
Illustration 7
64
The measurement is stored automatically
(except for guest mode, cf. Note P. 62). If
the memory store is full (30 measure-
ments), the oldest measurement is dele-
ted and the current one stored.
Invalid measurements with an "Err" mes-
sage (see page 70) are not stored.
Systole If the symbol
mmHg surement, it is recommended that the mea-
surement is repeated, holding the arm
completely still. If the
Diastole
ars again even with the arm held still, this
mmHg
may be an indication of an irregular heart-
beat. Please discuss this with your doctor
Pulse/min.
at your next visit.
appears after the mea-
symbol appe-