Measurement Display - Bosch+Sohn boso medicus X Mode D'emploi

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
illustration 7).
GB
Illustration 7
56
The measurement is stored automatically.
If the memory store is full (30 measure-
ments), the oldest measurement is dele-
ted and the current one stored.
Invalid measurements with an "Err" mess-
age (see page 62) are not stored.
If the symbol
Systole
urement, it is recommended that the
mmHg
measurement is repeated, holding the
arm completely still. If the
appears again even with the arm held still,
Diastole
this may be an indication of an irregular
mmHg
heartbeat. Please discuss this with your
doctor at your next visit.
Pulse/min.
appears after the meas-
symbol