Measurement Display - Bosch+Sohn boso medicus system Mode D'emploi

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
illustration 7).
Illustration 7
If the symbol
urement, it is recommended that the
measurement is repeated, holding the
arm completely still. If the
appears again even with the arm held still,
this may be an indication of an irregular
heartbeat. Please discuss this with your
doctor at your next visit.
Systole
Blood pressure is a dynamic parameter and
mmHg
can be affected by the patient's position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
Diastole
dition (stress, disease, etc.).
mmHg
Pulse/min.
appears after the meas-
If the measurement result is obviously
wrong, repeat the measurement.
symbol
GB
67