Nail Loading; Test Operation - Max NF665A/15 Manuel D'utilisation Et D'entretien

NAIL LOADING

Pusher
1 Insert the finish nails into the magazine.
2 Pull back the pusher.
3 Release and return the pusher.

TEST OPERATION

1
2
3
4
Finish nails
AIR HOSE CONNECTION
Connect the air chuck to the air plug.
When connecting the air chuck, do not point the nail dis-
charge outlet at any part of your body or at another person,
and do not touch the trigger.
9
Adjust the air pressure at 5 bar (70p.s.i.) and connect the air
supply.
Without touching the trigger, depress the contact arm
against the work-piece.
Pull the trigger (The tool must fire the fastener.)
With the tool off the work-piece, pull the trigger.
Then depress the connect arm against the work-piece. (The
tool must fire the fastener when you select contact actua-
tion.)
Adjust the air pressure as much as the lowest possible ac-
cording the length of fastener and the hardness of work
piece.
WARNING