Motorization Connection - SCS Sentinel Kit automatisme vérins Manuel D'installation Et D'utilisation

EN

MoToRIzATIon CONNECtION

> PRePARIng The 230 volT PoWeR suPPly
Basic data:
Your cabinet is open, fixed to its support surface and the cable holes are ready.
Thread your power cable through from under the cabinet 1 .
1)
Connect your power cable to the terminal strip 2 . No particular direction of connection.
2)
Cut off the power supply before making any connections. Implementation, electrical
connections and adjustments must be carried out in accordance with good practice by
a qualified and specialized person. If in doubt, seek advice!
Read the safety instructions before making any connections. Follow the electrical
connection instructions on page 3.
Before start-up, make sure the protective covers are tightly secured and interlocked.
en ::: 24
2
1