SCS Sentinel Kit automatisme vérins Manuel D'installation Et D'utilisation page 69

- Drill a hole in the rear left-
hand form (see diagram).
- Fit a compression gland
(not included)
- thread the 230V cables
6
through the
gland.
- Connect the cables to the
connectors (see next page).
(Figure 3)
- Drill holes for the cables
using the 2 forms provided for
the purpose (figure 4) :
- motors
- accessories: photoelectric
7
cells, light, aerial....
- Pass the cables through.
- Connect the motor and
accessory
following pages).
en ::: 23
hole
230 Volt cable
compression
cables (see
compression
gland
trou
accessoires
compression
gland
hole for
accessories
and motors
EN
FIguRe 3
FIguRe 4