Assembling Your Blender; Selecting The Speed - Oster 6805-050 Manuel D'instructions

INSTRUCTIONS FOR USE

Assembling Your Blender

1.
1. Turn Jar upside down so the small opening is at the top. Place Sealing Ring over
Jar opening.
2. Place Blade into Jar.
3. Snap Threaded Bottom Disc and Collar together. Place Collar over Blade and Jar.
(Note: If there are slots on top of Collar, line them up with notches on Jar.) Place
the Collar on Jar and turn the Threaded Bottom Disc clockwise to tighten.
4. Place Jar assembly onto base.

SELECTING THE SPEED

PUSH BUTTON MODEL
Slide switch to s High or t Low.
Push desired speed and blend ingredients to desired consistency.
Push OFF "O" to stop the Blender and turn Blender off.
To use PULSE, select s High or t Low. Push PULSE and hold down for desired length
of time.
Release PULSE and allow Blade to stop. Repeat cycle as desired.
TIP: Refer to the "Guide For Processing Foods in Blender" for information on
processing foods.
3.
2.
4
4.
TIGHTEN