ZANKER KEE8447XXK Notice D'utilisation page 19

heat setting comes on. After 3 seconds
the display.
To stop the function, touch
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time.
Set the Timer after the selection of the cooking
zone.
You can set the heat setting before or after you set the
timer.
• To set the cooking zone: touch
again until the indicator of a necessary cooking zone
comes on.
• To activate or change the Timer: touch
of the timer to set the time (
When the indicator of the cooking zone starts to
flash slow, the time counts down.
• To deactivate the Timer: set the cooking zone with
and touch to deactivate the Timer. The re-
maining time counts back to
the cooking zone goes out.
• To see the remaining time: set the cooking zone
with . The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates
00
and flashes. The cooking zone deactivates.
• To stop the sound: touch
comes on in
.
4 5 6 7 8
again and
or
00 99
- minutes).
00
. The indicator of
Minute Minder
You can use the Timer as a Minute Minder while the
cooking zones do not operate. Touch
to set the time. When the time comes to an end, the
sound operates and
• To stop the sound: touch
Lock
When the cooking zones operate, you can lock the con-
trol panel, but not
of the heat setting.
First set the heat setting.
To start this function touch
on for 4 seconds.
The Timer stays on.
To stop this function touch
you set before comes on.
9
When you stop the appliance, you also stop this func-
tion.
The Child Safety Device
This function prevents an accidental operation of the
appliance.
To activate The Child Safety Device
• Activate the appliance with
settings.
• Touch
of the two front cooking zones for 4 sec-
onds. The symbol
• Deactivate the appliance with
To deactivate The Child Safety Device
• Activate the appliance with
settings. Touch
for 4 seconds. The symbol
• Deactivate the appliance with
To override The Child Safety Device for only one
cooking time
• Activate the appliance with
comes on.
• Touch
of the two front cooking zones for 4 sec-
onds. Set the heat setting in 10 seconds. You can
operate the appliance.
• When you deactivate the appliance with
Child Safety Device operates again.
. Touch
00
flashes
. It prevents an accidental change
. The symbol
. The heat setting that
. Do not set the heat
comes on.
.
. Do not set the heat
of the two front cooking zones
comes on.
.
. The symbol
or
comes
, The
19