Maintenance - RIDGID OCTANE R860443 Manuel D'utilisation

OPERATION
ATTACHING THE ROUND SUBBASE
See Figure 17, page 14.
NOTE: To use the round subbase with the vacuum adaptor,
install the adaptor first and then attach the subbase.
 Remove the battery pack.
 Turn the router upside down to remove the four subbase
screws and the square subbase.
 Align the tabs on the round subbase with the grooves in
the removable base, then place the round subbase onto
the removable base.

MAINTENANCE

WARNING:
When servicing, use only identical replacement
parts. Use of any other part could create a hazard
or cause product damage.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your
eyes and other possible serious injuries.
WARNING:
To avoid serious personal injury, always remove
the battery pack from the tool when cleaning,
performing any maintenance, or when storing the
tool.
NOTE: ILLUSTRATIONS START ON PAGE 12
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
www.RIDGID.com or call (toll free) 1-866-539-1710.
as well as a Three-year Limited Warranty.
For Warranty and Policy details, please go to
 Attach the round subbase using the four subbase screws.
 Tighten the screws securely. Do not over tighten.
WARNING:
Always use a subbase recommended for use with
this product when trimming. Use of the router
without a subbase or using the incorrect subbase
can result in serious personal injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which could
result in serious personal injury.
11 - English