Sony DEV-3 Mode D'emploi page 22

To set the date and time again, select

(MENU)  [Setup]  [
Clock Settings)]  [Date & Time
(
Setting]  [Date & Time]. When [Date
& Time] is not on the screen, press
until the item appears.
7
Select [60i (NTSC)] or [50i (PAL)]
to suit the TV color system used
in your country/region, then
press Enter.
When the 60i/50i selection is made,
this product restarts to update the
system.
See page 24 for details on the TV color

system in your country/region.
8
Confirm the warning about
continuous use and the warning
about viewfinder adjustment,
then select [Next].
9
Adjust the relative vertical
position of the right and left
viewfinder.
Make sure that the horizontal line
overlaps the vertical lines.
GB

Image in the left
viewfinder
 
/
If the horizontal line and the vertical
lines do not overlap, adjust the position
of the image in the right viewfinder
by selecting
overlap, then select
If you see the image below, the device

works correctly.
If you see the image below, stop using this

product.
The horizontal line and the vertical lines do not
overlap.
The horizontal line is extremely tilted.
If you cannot see images correctly, this
product may be damaged. Contact
your Sony dealer or local authorized
Sony service facility.
Image in the right
viewfinder
Image viewed by both eyes
/ until the lines
.