Charging The Battery Pack Using The Ac Adaptor/Charger (Dev-5K); Charging Time - Sony DEV-3 Mode D'emploi

Masquer les pouces Voir aussi pour DEV-3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Charging the battery pack using
the AC Adaptor/Charger (DEV-5K)
The AC Adaptor/Charger can charge the
battery pack faster than charging it with
this product.
Power cord (mains
lead)
Mode switch
Set the mode switch on the AC
Adaptor/Charger to CHARGE.
Connect the power cord (mains
lead) to the AC Adaptor/Charger.
Connect the power cord (mains
lead) to a wall outlet (wall socket).
Attach the battery pack to the AC
Adaptor/Charger by sliding it in
the direction of the arrow.
The CHARGE lamp lights up and
charging starts.
When charging is complete, the battery
mark is displayed (
To the wall outlet
(wall socket)
CHARGE lamp
).
If you continue to charge the battery
after normal charging is complete until
the battery mark shows "FULL, " the
battery pack can be used slightly longer
than when in the normal charged state.

Charging time

Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Charging with this product
Battery pack
NP-FV70
NP-FV100
Charging with AC Adaptor/Charger
(supplied with DEV-5K)
Charging
Battery pack
(NORMAL)
NP-FV70
NP-FV100
The charging times shown in the table above
are measured when charging this product
at a temperature of 25
recommended that you charge the battery in
a temperature range of 10
to 86 °F).
Tips
See page 44 on recording and playing time.
When this product is on, you can check the
approximate amount of remaining battery
power (expected recording and playing time)
with the remaining battery indicator at the
upper right on the screen.
Charging time
195
390
Charging
time
time
(FULL)
70
130
125
185
C (77 °F). It is
C to 30
C (50 °F
GB
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dev-5Dev-5k

Table des Matières