Shooting Photos - Sony DEV-3 Mode D'emploi

The following states will be indicated if data is

still being written onto the memory card after
recording has finished. During this time, do
not apply shock or vibration to this product, or
remove the battery or AC Adaptor.
Access lamp (p. 25) is lit or flashing

The media icon in the upper right of the

screen is flashing
Tips

See page 45 on the recordable time of movies.

You can check the recordable time, estimated

remaining capacity, etc., by selecting
(MENU)  [Setup]  [
Settings)]  [Media Info].
To switch the 2D and 3D recording
mode
You can select a recording mode of either
2D or 3D.
To switch 2D and 3D, select
 [Image Quality/Size]  [2D/3D Mode
Select].
Tips

When you change the [2D/3D Mode Select]

setting, movies played back on this product and
movies output from the HDMI OUT jack are
changed between 2D and 3D automatically.
Optimum distance from the subject
and zooming level
The distance at which you can obtain
good 3D movies varies depending on the
zooming level.
Distance from the subject
about 80 cm to 6 m (3 ft. to
20 ft.)
about 2.5 m to 10 m (8 ft. to
32 ft.)
about 7.5 m to 20 m (25 ft. to
65 ft.)
( Media
(MENU)
Zoom

Notes
When you record 3D movies, the binocular

magnification can be set to up to about 5 times.
If you want to monitor * or record a subject
using a larger image, set [2D/3D Mode Select]
to [2D].
In this manual, "monitor" means that the user
*
watches or views a subject without recording.
Data code during recording
The recording date, time, condition and
coordinates (DEV-5/5K) are recorded
automatically on the memory card. They
are not displayed during recording.
However, you can check them as [Data
Code] during playback. To display them,
(MENU)  [Setup]  [
select
Playback Settings)]  [Data Code]
(
 a desired setting 

Shooting photos


Press MODE to turn on the
(Photo) lamp.
The screen display switches for photo
recording mode.
MODE button
(Movie): When recording a movie
(Photo): When recording a photo

.
GB