Publicité
Once you have installed the wheel, rotate it 180° (when facing the wheel, the Ferrari® logo should be
upside down) to access the small attachment screw located on the ring of the Thrustmaster Quick
Release device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use
excessive force), turning it clockwise.
Do not use excessive force when tightening the small attachment screw (using a Phillips
screwdriver)! Stop turning the screw as soon as you feel some resistance.
IMPORTANT INFORMATION!
To ensure that your 250 GTO Wheel Add-On functions correctly with your racing wheel's base (in particular
with the TS-PC Racer, TS-XW Racer, T-GT, TX, T300 and T500 bases), it is imperative that you update
your base's firmware with the latest version available at https://support.thrustmaster.com (click on Racing
Wheels / [your base's name] / Firmware, then follow the instructions and the download and installation
procedure).
2/5
Publicité
