Bodum BISTRO Mode D'emploi page 6

Masquer les pouces Voir aussi pour BISTRO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
USING THE
Ensure control lever (D1) and (D2) is raised.
TOASTER
Plug (K) into a suitable mains supply socket.
Insert up to four slices of bread into toasting slots (E1) and (E2).
Turn the variable browning setting knob (A1) and (A2) dial to
required setting. (1=lightest, 5=darkest)
Press down control lever (D1) and (D2) until it locks.
Once the chosen level of browning has been reached, the
toast will automatically raise ready for removal from the slots.
If the first slices are not browned sufficiently, select a higher
setting (A1) and (A2) next time.
If you want to interrupt the toasting process, press the stop
button (C1) and (C2) at any time to stop the toasting process.
The slots (E1) and (E2) can work individually.
USING THE
When using bread straight from the freezer set the browning
DEFROST
control to the required position and press down the control
BUTTON
lever (D1) and (D2) until it locks. Press within 2 sec. the defrost
button (B1) and (B2) corresponding. The defrost light will
remain on while the defrost function is in use, and toasting
time will be automatically extended. Always keep an eye on
the bread for any signs of burning.
USING THE STOP
Press the stop button (C1) and (C2) at any time to stop the
BUTTON
toasting process.
USING THE RACK
Slide the lift button (G1) and (G2) to lift the integrated
warming rack (F1) and (F2) corresponding.
Put the buns and croissants to warm on the rack (F1) and (F2).
Turn the knob (A1) or (A2) corresponding to level 1.5.
Press down control lever (D1) or (D2) corresponding until it locks.
USING THE CORD
You can store excess power cord (K) by winding around the
STORAGE
cord storage (I) inside the base.
9
CLEANING AND
Always remove plug from the power outlet, allow the toaster
MAINTENANCE
to cool down thoroughly before cleaning.
To clean the inside, turn toaster upside down over the sink
and gently shake. After toasting, allow the toaster to cool
down thoroughly, and then slide out the crumb trays (H1) and
(H2) and empty.
Use a soft dampened cloth to wipe the outside of the toaster
and dry with a soft, dry cloth.
Never use chemicals, steel wool or abrasive agents to clean
the exterior of the toaster.
Do not immerse your toaster in water.
Do not use any sharp or pointed articles for cleaning the
inside as this will damage the heating element.
Never put metal objects or your fingers into the toasting slots.
Any other servicing should be performed by an authorized
service representative.
HINTS AND TIPS
For best results use bread slices of even thickness, size and
FOR BETTER
freshness. Select a lower setting if:
TOASTING
a) using stale bread (toasts more quickly than fresh bread)
b) using thin bread (toasts more quickly than thick bread)
To keep items such as muffins, crumpets bagels warm slide
the button to lift the rack and put the items at the top.
To achieve even browning, we suggest a minimum of 30
seconds between each toasting to allow the control to auto-
matically reset.
Do not use very thin or broken slices of bread.
Do not insert other foods that may drip during the toasting
process. As well as making the cleaning procedure more dif-
ficult it may be a potential fire hazard.It is also very import-
ant to clean the crumb tray before each use.
Do not insert (by force) foods that are too big for the slots.
Do not insert forks or other utensils into the toaster in order
to remove bread, as it may damage the resistance coils of
the appliance. Remove the plug from the socket and turn the
appliance over, gently shaking it to remove the lodged items.
10
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

11840-4

Table des Matières