Installing And Connecting; Use; First Use; Fuel - Dovre 640CB Installation Et Mode D'emploi

2. Install the cover (2) with mounting plate (B) and
bolt (C) in the outlet (A) that is not connected to
the chimney; see following figure.
The cover is designed to form a whole with the
top plate when placed on the upper side.
3. Use the supplied stove sealant for sealing the
connection collar and the cover.
Fitting the handle
The appliance is supplied with a loose handle, the so-
called "cold hand".
Fit the wooden handle to the adaptor using screw
M8x50 provided; see following figure.
09-20015.088
8

Installing and connecting

1. Install the appliance in the right place, and make
sure it is level.
2. Connect the appliance hermetically to the flue.
3. In the case of connection to outside air: connect
the outside air supply to the connector you have
fitted to the appliance.
4. Install all the parts you removed in the right places
in the appliance.
Never use the appliance without the fire-
resistant inner sheets.
The appliance is now ready for use.

Use

First use

When you use the appliance for the first time, make
an intense fire and keep it going for a good few hours.
This will cure the heat-resistant paint finish. This may
result in some smoke and odours. You could open
windows and doors for a while in the area where the
appliance is located.

Fuel

This appliance is only suitable for the burning of
natural wood; sawn and chopped wood that is
sufficiently dry.
Do not use other fuels, as they can lead to serious
damage to the appliance.
You are not allowed to use the following fuels, as they
pollute the environment and because they heavily soil
the appliance and flue, which may lead to a chimney
fire:
Treated wood, such as scrap wood, painted wood,
impregnated wood, preserved wood, plywood and
chipboard.
Plastics, scrap paper and domestic waste.
Wood
Hardwood, such as from oaks, beeches, birches
and fruit trees, is the ideal fuel for your stove. This
Subject to change because of technical improvements