Introduction - HEBU medical HF 9505 Mode D'emploi

EN

1 Introduction

An electrosurgical unit is a generator used to transform electronic energy into high-frequency
alternating current (HF current).
If this current flows through human tissue, it creates heat which is used for cutting and for coagulation
of the tissue.
The HBS x-touch 200 is a versatile and compact electrosurgical unit which complies to a high safety
standard and unites economy with operative flexibility.
It offers the following application modes:
For monopolar surgical use
•
Pure cut
•
Blend cut
•
Polypectomy mode
•
Soft coagulation
•
Forced coagulation
For bipolar use:
•
Bipolar Coagulation
•
Bipolar Cutting in water environment (TUR)
Benefits of the HBS x-touch 200:
Simple, intuitive and safe operation
Current terminal for optional wireless foot switch, max. 0.5 A
Display-supported neutral electrode safety system helps interactively when applying the neutral
electrode
Nine storage locations for individual program settings
One monopolar multifunction terminal for 3-pin standard or Martin plug
Scope for input of an AutoDelay until the prescribed output is reached and an AutoStop function for
automatic interruption of the energy supply after a certain tissue resistance level is reached
Tone signal with scope for control of the volume and an alarm tone in case of faults without facility
for switching off
Coloured illumination of the LCD display in red, yellow, blue to indicate different operating modes
or error statuses
Facility for tracing output and impedance at the LCD display in the patient circuit on activation
Worldwide application possible through connection scope from 100 to 260 volts, 50 to 60 Hz
28
HBS x-touch 200