Technical Data; Before Starting Up - Scheppach CSH58 Mode D'emploi

speed from failure/disorder of the control system relat-
ed to failure in the handles and position of the controls.
Hazards from failure of the control system related to
handle strength, position of controls and marking.
Hazards from break up (chain) during operation related
to saw chain.
Hazards from ejection of objects or fluids related to chip
discharge and fuel spillage.
Hazards from dropping the chain-saw while working in
a tree.
RISK OF INJURY !
Contact with the saw-chain can lead to fatal cutting in-
juries.
Never put your hands into the running saw-chain.
RISK OF KICKBACK!
Kickback can lead to fatal cutting injuries.
RISK OF BURNING!
The chain and the guide bar heat up during operation.
Behaviour during an emergency
Start First Aid measures relevant to the injury and re-
quest medical help as quickly as possible. Prevent the
injured person from further injury and keep him/her rest-
ed. For potentially occurring accidents, the First Aid kit,
according to DIN 13164, should always be handy at the
work place. Material taken from the First Aid kit must be
replaced immediately. When you are requesting help,
give the following information:
1. Location of accident
2. Type of accident
3. Number of injured people
4. Type of injuries
Store all safety notices and instructions for the future.

6. Technical data

Machine without guide
bar L x W x H
Weight without guide
bar and saw chain and
empty tank
Weight with guide bar
and saw chain and emp-
ty tank
Cutting Length
Guide bar length
Automatic chain oiling
Saw chain Oil
Saw chain oil tank ca-
pacity
Saw chain division
Drive link thickness
42 GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
375 x 182 x 190 mm
5.5 kg
7.0 kg
47 cm
51 cm
ja
Special
Saw chain oil
260 cm
3
8,255 mm (0.325")
1.5 mm (0,058")
Saw chain type
Number of teeths drive
sprocket
Tooth pitch of drive
sprocket
Chain brake
Guide bar type
Saw chain speed max.
Motor
Engine capacity
Maximum motor capac-
ity
Idle speed
Maximum speed with
cutting attachment
Fuel tank capacity
Fuel type
Keep the noise emissions and vibrations to a mini-
mum.
• Only use appliances which are in perfect working or-
der.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Measured sound pressure level L
Uncertainty K
pA
Guaranteed sound power level L
Measured sound power level L
Uncertainty K
wA
Vibration Front handle
Vibration Rear handle
Uncertainty

7. Before starting up

m CAUTION!: Start the engine only when the saw is ful-
ly assembled.
m CAUTION!: When handling the chain always wear
protective gloves.
Assembling the bar, and the chain
(Fig.3-6)
Open the box and assemble the bar and chain as fol-
lows:
1. Press the front hand guard back (Fig.14/Pos.3a) so
that the chain brake is disabled.
2. Loosen the two nuts (B) and remove the cover (17)
Kangxin .325.058-76
7
8,255 mm (0.325")
yes
Kangxing BE20-76-5812P
22 m/s
1 cylinder
2 stroke
air cooled
56 cm³
2,3 kW
3100±300 rpm
11000 rpm
550 cm
3
mix 40:1
99,6 dB(A)
pA
3 dB
114 dB(A)
wA
110,3 dB(A)
wA
3 dB
6,72 m/s²
6,38 m/s²
1.5 m/s²