Auerswald COMfortel 1400 Notice D'utilisation page 13

Important: The device is not designed or intended for use in life-support
systems and/or nuclear facilities. The device can only be used for these
purposes with prior written permission/clarification from the manufacturer in
each individual case.
Improper use may, for example, cause functional restrictions or
malfunctions, the destruction of the device or, in a worst case scenario,
personal injury.
• If you are still uncertain about how to use the product properly after reading
the section below, please contact your specialised dealer.
• Read the manuals for the device and keep them for future reference.
• Some of the functions require a software expansion (activation), activation
by the network provider, a firmware update and/or configuration via
COMfortel Set.
Proper Use
System telephone for connection to the internal S
supplied by Auerswald/FONtevo (see Technical Data). There is no provision for
connecting to another manufacturer's PBX or to a network provider's external
S connection. The telephone is corded, and is intended for use in closed, dry
0
rooms.
Technical Data
Operating voltage
Power
consumption
System connection Internal S
Memory
Displays
User elements
Receiver
Headset
Power from the PBX via the internal S
Min. 1.1 W, max. 2.0 W
port or U
0
PBXs: COMpact 3000 analog/ISDN/VoIP,
COMpact 2206 USB, COMpact 4410 USB,
COMpact 5010 VoIP, COMpact 5020 VoIP,
COMpact 4000, COMpact 5000/R, COMpact 5200/R,
COMpact 5500R, COMmander 6000/R/RX.
COMmander Basic 2/19", COMmander Business/19"
Micro SD/SDHC card, 8 GB (recommended, not in
the scope of delivery)
14 LEDs, 10 are polychromatic. 3.5" TFT colour
display, 320 x 240 pixels, backlight
Keypad, 13 permanently assigned function keys,
colour display with touch operation, directional pad,
10 programmable function keys with LEDs (on which
up to two functions can be assigned on two levels),
additional touch function keys on the display
Wideband audio, electret microphone, dynamic
receiver loudspeaker, hearing aid compatible
Separate interface for dynamic headsets
or U
0 P0
port from one of the following
P0
port on a PBX
or U port
0 P0