Rinse Nozzle For Powder Dispenser - Miele professional A 302 Mode D'emploi

en - Areas of application
32

Rinse nozzle for powder dispenser

Washer-disinfectors with a powder detergent dispenser  in the
door which use powder detergent in combination with an upper bas-
ket and two modules in the bottom basket have to be fitted with an
A 802 rinse nozzle for powder detergent.
This rinse nozzle flushes the powder detergent out of the dispenser
during the programme.
A rinse nozzle is not required if liquid detergent is used.
The rinse nozzle has to be fitted in the front left side of the left hand
module in the lower basket:
Unscrew the existing nozzle with a spanner and remove it.

Screw the rinse nozzle into its place and secure with the spanner.

The rinse aperture must point forwards.
The rinse nozzle must not be concealed by load items.
If one of the modules is placed in the left-hand position in upper
basket A 100 in a washer-disinfector with a powder detergent dis-
penser  in the door, the front left injector nozzle must be re-
moved and replaced with an E 362 blind stopper if powder deter-
gent is being used.
A blind stopper does not have to be fitted when using cleaning
agent.