Strain Relief For Dispensing Hoses; Connecting The Dispensing Hoses - Miele professional DOS G 80 flex Notice De Montage

en - Connection
Strain relief for
dispensing hoses
Connecting the
dispensing hoses
50
Unscrew the back panel and disengage the area around the dis-

penser connection.
When setting the dosage please note:
For cleaning agent dosage the dispensing concentration must be
doubled in the controls for PG 8080, PG 8081i, PG 8082 SCi and
PG 8083 SCVi machines.
See the specifications for setting the dispensing concentration in
the operating instructions.
The strain relief provided with the dispensing modules for the dis-
pensing hoses is fitted to the bottom right-hand side of the back of
the machine to prevent the hoses from dislodging themselves from
the dispenser connections during use.
The dispensing module is tested at the factory for functionality.
Any residues of the harmless test medium are a result of this testing
and not evidence of previous use.
Pull the safety cap off the end of the hose and remove the protect-

ive foil from the siphon.
Connect the hose with the dispenser connection to the cleaning

machine.
Connect the module to the machine's power supply.

Connections for the dispensing hoses are located on the back of the
cleaning machine.
These are described in detail in the operating instructions for your
cleaning machine.