Using The Fitvigo App; Cleaning - ADE BA 1600 FITvigo Mode D'emploi

Using the FITvigo app

The data ascertained by the scale are transmitted to the FITvigo app, as long as you
have connected it to the scale (see "Connect Device with the App").
In this regard, pay attention to the following symbols:
Meaning
Symbol
Existing Bluetooth connection
Data is being transmitted
‚ Data transmission successful: the symbol disappears.
‚ Data transmission unsuccessful: the symbol continues to be
displayed. The pending measurement data is temporarily stored in
the scale and, after finishing the next measurement, transferred to
your smartphone.
Abide by the following points in order to prevent possible transmission problems:
‚ The distance between the scale and your smartphone should not exceed 10 m.
‚ There should be no obstructions between the scale and the smartphone.
‚ Other electronic devices (in particular those that are Bluetooth enabled) should be
at least 1 m away from the scale.
‚ Ensure that the Bluetooth function on your smartphone is switched on.

Cleaning

NOTE on material damage
− Do not immerse the scale in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scale. If you do, the surface
could be scratched.
− Wipe down the scale as needed using a lightly dampened, soft cloth.
− Disinfect the weighing surface and the sensors from time to time using a suitable
disinfecting agent (available at specialist retailers and pharmacies).
Body Analyser Scale BA 1600 | BA 1800
Using the FITvigo app
29