Resetting The Scale To Zero; Using The Tare Function (Tara); Switching Off The Scale - ADE Julia Mode D'emploi

Operation
5. If you want to weigh an item or substance in a container, now place the container
without anything in it onto the weighing surface. Otherwise, proceed as described
in Section 6.
6. Press TARE. "0" is shown on the display.
7. Put the item or substance to be weighed into the container or place it onto the
weighing surface.
The measured weight is shown on the display.
8. Read off the measured weight and remove the item or substance from the
container or the weighing surface.

Resetting the scale to zero

If the display still shows a minus value (symbol ) even though the weighing surface is
empty (for example, if the scale is not optimally positioned or a TARE value is still
displayed; see next section), you must reset the scale to zero.
− Briefly press TARE 1x.
If the scale has correctly been reset to zero, the display will also show

Using the tare function (TARA)

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scale.
1. Press TARE in order to set the scales back to "0".
‚ If the weight on the weighing surface is less than 120 grammes, the
display will show
‚ If the weight on the weighing surface is more than 120 grammes, the
display will show
2. Add the new item or substance. The weight of the added item or substance is
shown on the display.
3. Repeat the process whenever you would like to add more ingredients. The process
can be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scale

− Hold down TARE until the indicator on the display goes out.
The scales automatically switch off if they are not used for approx.
1.5 minutes.
18
(zero function).
(tare function).
.
Kitchen scales KE 1823