Cleaning
Cleaning
NOTE on material damage
− Do not immerse the scales in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scales. If you do, the surface
could be scratched.
− Wipe down the scales as needed using a lightly dampened, soft cloth.
− Disinfect the weighing surface and the sensors from time to time using a suitable
disinfecting agent (available at specialist retailers and pharmacies).
Fault/Remedy
Fault
No function
The scales appear to be displaying
false weighing results
SYMBOL
Analysis of body fat proportion not
possible.
"----" is shown on the display
"
" is shown on the display
30
Possible Cause
Are the batteries empty or have they been
inserted incorrectly?
Are the scales standing on a firm, even
surface?
Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scales?
Remove the batteries from the scales and
wait a moment. Re-insert the batteries. The
data stored up to this point will be retained.
For body analysis measurement: Was your
body cold during measurement? Then it's
possible your blood was circulating poorly.
Warm your hands and feet and repeat the
measurement.
Were you standing still and barefoot on the
weighing surface during the measurement?
Your feet must be in complete contact with
the weighing surface.
The maximum capacity of the scales (180 kg)
has been exceeded.
The batteries are empty (see "Inserting/
changing batteries").
Body Analyser Scales BA 1601