Accessories; Standard Accessories; Optional Accessories - Hitachi CJ 110MV Instructions De Sécurité Et Mode D'emploi

WARNING:
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

No. 41 Blade ......................................................................................................................... 1
Allen wrench ........................................................................................................................ 1

OPTIONAL ACCESSORIES.....

No. 1 Blade (Long) (Code No. 879227)
No. 1 Blade (Super Long) (Code No. 321878)
No. 11 Blade (Code No. 963390)
No. 12 Blade (Code No. 963391)
No. 15 Blade (Code No. 963392)
No. 16 Blade (Code No. 963393)
No. 21 Blade (Code No. 963394)
No. 22 Blade (Code No. 963395)
No. 97 Blade (Code No. 963400)
Guide (Code No. 879391)
Sub base (Steel) (Code No. 321994)
Sub base (Resin) (Code No. 321995)
Special screw (Code No. 321996)
(For installation of the sub base)
Bench stand (Model TR12-B)
Splinter guard (Code No. 321590)
Dust collection adapter (Code No. 321591)
Chip cover
NOTE: Specifications are subject to change without any obligation on the part of the
HITACHI.

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
sold separately
English
19