Velleman CAMCOLD25 Notice D'emploi page 9

Zone Masking for Privacy
Use this function to block a part of the image where you do not want
to view activity. For example, if part of the image shows a public
area where recording may be illegal. You can define up to 8 areas.
Menu: ZONE MASKING
COLOR
AREA NO 0–7
V. 01 – 13/01/2015
CAMCOLD25/CAMCOLD25W
Select black, white or a colour for the mask, or
select MOSAIC for a mosaic effect in the masked
area.
To define up to 8 areas. Select the desired area
and use the settings below.
 STATUS: select ON to activate the selected
masked area; select OFF to deactivate the
selected masked area.
 HORIZON SIZE:
set the width [a]
(in pixels) of the
masked area.
 VERTICAL SIZE:
sets the height
[b] (in pixels) of
the masked area.
 HORIZON MOVE:
sets the distance
(in pixels) from
the left side of the
screen [c] for the
masked area.
 VERTICAL MOVE:
sets the distance
(in pixels) from
the top of the
screen [d] for the
masked area.
9 ©Velleman nv