Velleman CAMCOLD25 Notice D'emploi page 10

Motion Detection
Use this function to see motion detection during live monitoring. You
can define up to 4 separate areas for motion detection. If the camera
detects motion in an area, the outer edge of that area will 'flash'.
Menu: DIRECTION
SENSITIVITY
AREA NO 0–3
Language
Use this function to set the language of the OSD menu.
V. 01 – 13/01/2015
CAMCOLD25/CAMCOLD25W
Set the motion detection sensitivity. With a higher
sensitivity, slighter movements will be detected.
Available options for sensitivity: WEAK (weak);
LOW (low); MIDDLE (medium), and HIGH (high).
To define up to 4 areas. Select the desired area
and use the settings below.
 STATUS: select ON to activate the selected
detection area; select OFF to deactivate the
selected detection area.
 COLOR: set the colour of the detection area.
The outer edge of the area will flash in this
colour when the camera detects motion.
 HORIZON SIZE: set the
width [a] (in pixels) of the
detection area.
 VERTICAL SIZE: sets the
height [b] (in pixels) of the
detection area.
 HORIZON MOVE: sets the
distance (in pixels) from
the left side of the screen
[c] for the detection area.
 VERTICAL MOVE: sets the
distance (in pixels) from
the top of the screen [d]
for the detection area.
10 ©Velleman nv