Publicité
Les langues disponibles
Les langues disponibles
(4) Fuel filter service
The filter prevents dirt or water which may be in fuel tank from
entering the carburetor. If the engine has not been run for a long
time, the filter should be cleaned.
1. Turn the fuel valve OFF. Remove the filter cup.
2. Clean the cup thoroughly.
3. Reassemble. Do not damage the rubber gasket.
WARING!
After installing the filter cup, check for leaks and make sure
the area is dry before starting the engine.
7．TRANSPORTING/STORAGE
WARING!
When transporting the generator, turn the engine switch
OFF and keep the generator level to prevent fuel spillage. Fuel vapor
or spilled fuel may ignite.
Before storing the unit for an extended period:
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel:
a. With the fuel valve OFF, remove and empty the filter cup.
b. Turn the fuel valve ON and drain the gasoline in the fuel tank into
a suitable container.
15
Publicité
