Safety Instructions; Cutting Equipment - Husqvarna 123L Manuel D'utilisation

Cutting equipment

This section describes how through correct maintenance and
through using the right type of cutting equipment you can:
• Reduce the machine's tendency to kickback
• Obtain maximum cutting capacity.
• Increase the service life of the cutting equipment.
The three basic rules:
1)Only use the cutting
and guard equipment
we recommend! See
chapter "Technical
data".
2)Keep the blade's teeth
well and correctly
sharpened! Follow our
instructions and use the
recommended filing
gauge. An incorrectly
sharpened or damaged
blade increases the risk
of an accident.
3)Check the cutting
equipment with regard
to damage and crack
formation. Damaged
cutting equipment
should always be
replaced.

SAFETY INSTRUCTIONS

IMPORTANT INFORMATION
The section describes how through correct
maintenance and through using the right type of
cutting equipment you can reduce the machine's
tendency to kickback, obtain maximum clearing
capacity and increase the service life of the cutting
equipment.
• Only use the cutting and guard equipment we
recommend! See chapter "Technical data".
• Refer to the instructions for the cutting equipment
for the correct winding of cord and for the
selection of the right cord diameter.
• Keep the blade's teeth well and correctly
sharpened! Follow our recommendations. Also
refer to the instructions on the blade packaging.
!
WARNING!
Incorrect cutting equipment or an
incorrectly sharpened blade increases
the risk of kickback.
Filing the grass
blade
• See the cutting
equipment's packaging for
correct filing instructions.
• The blades are sharpened
using a single cut flat file.
• Sharpen all edges equally
to maintain the balance of
the blade.
EN
3
English –