Maintenance - Husqvarna 230iB Manuel D'utilisation

Introduction
WARNING: Before you do any maintenance
work you must read and understand the
safety chapter.

Maintenance

Clean the outside of the machine with a clean and dry cloth. Never use water.
Keep handles dry, clean and free from oil and grease.
Make sure that the power button works correctly and is not damaged.
Make sure the power trigger is functioning properly with regard to safety.
Check that nuts and screws are tight.
Check that the battery is intact.
Check the battery's charge.
Check that the release buttons on the battery works and locks the battery into
the machine.
Check that the battery charger is intact and functional.
Check that all connections are intact and free from dirt.
Check the connections between the battery and the machine and also check the
connection between battery and the battery charger.
To do a check of the air intake
1. Make sure that the air intake is not blocked.
2. Stop the product and remove leaves or unwanted
material if it is necessary.
CAUTION: A blocked air intake
decreases the blowing capacity of the
product and increases the work
12
Maintenance
Maintenance schedule
The following is a list of the maintenance steps that you
must do on the product.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
WARNING: Remove the battery before you
do maintenance.
Daily Weekly
X
X
X
X
X
X
X
X
X
temperature of the motor. If the motor
becomes too hot, it can result in motor
failure.
1516 - 002 - 22.07.2020
Monthly
X
X